Wine stoppers Throw back Mold Rubber Monday

Good day all! welcome to a Throw back Monday on Mold Rubber Monday to show you an AMAZING (picture heavy) tutorial.

If you know me, you know I am a wine connoisseur. I love going to wineries and taking tours especially the taste testing, LOL. I have collected a lot of wine corks to some day make something magnificent with – but until I figure out exactly what I want to do with them, I decided to use one to make multiple bottle stoppers. I kinda ran with this before really thinking it out so let's experiment together.

If you have ever tried to put a cork in an opened bottle you know it's somewhat difficult. That's why they make these super cute "winestoppers" that can also be pretty expensive. Therefore, why not make your own? I started with a cork and cut it to make sort of a chisel point.

Then using my Creative Paperclay® I wrapped it around the chiseled part and made it into a nice rounded point and let it dry. Paperclay takes about 24 hours to dry.

Once it was dry I sanded it smooth.

I added some Amazing Clear Cast Resin to it to make it smooth and non porous so that I could use my Amazing Mold Rubber to create a mold that I could use over and over and over again. You definitely need to have a non porous item...

Once the Amazing Clear Cast Resin set up (about 24 hours), I hot glued it to the bottom of a yogurt container. It was just the right size for my "winestopper" with a little bit of room at the top so that the Amazing Mold Rubber covered it completely.

I mixed and poured the Amazing Mold Rubber and let it set up overnight.

Please CLICK HERE to watch how to mix/prepare Amazing Mold Rubber.

I wanted to be positive it set up completely –

being a thick mold and also it's the middle of winter.

Now here is where the tricky part came. I could not get my "winestopper" out.

I wound up cutting my mold in half. 

This picture shows a well used mold, I've used it

about 20 times so far... looks like it, doesn't it?

Once I put the pieces together I wrap a bit of painters tape around the mold to keep any leakage from happening, but honestly the mold really stays well together.

Here is an example of the two pieces separated with a molded piece. 

I just used my Exacto knife to cut away the little bit of overflow. The top of the "winestopper" looks like a well used cork where the bottom is nice and smooth.

I wanted to somehow incorporate a way to add items to my "winestoppers" and remembered I had these cute little forks and thought they might do the trick. 

After you pour your Amazing Casting Resin let it set up a minute or until you see it start to turn white and insert your fork piece and hold it steady until it sets up all the way. Another couple of minutes and you can let go. Let that set up a little longer to make sure it is completely set up. (See the strip of tape around the mold?) That's just to make sure the mold doesn't leak through.

Here is another "fork" going into the mold using the Alumilite Dye

in Brown to give it more of that "cork" color.

And that is how I attach all my "molded" pieces to my "winestoppers".

You can use E6000®, which is my favorite glue for all of my resin pieces.

Topped with a Chalkboard Heart.

A Butterfly (which got sold at the Winter Bazaar I was at last week).

I even used wire and curled it and inserted it into the mold 

while it was setting up to make a table marker that holds a card.

I even made a"winestopper" with an elephant using Amazing Clear Cast Resin.

 

Ready for some football?

And of course, my all time favorite, my elephant.

All the pieces for my "winestoppers" are also made with Amazing Mold Putty, Amazing Casting Resin, Amazing Clear Cast Resin and various Alumilte Dyes, Alumilite Metallic Powders or painted. ALL the items are sealed with Amazing Clear Cast Resin. The possibilities are endless and I think I've made about 20 different "winestoppers" so far. 

So, when you want a variety of the same item, make it yourself!

What would you LOVE to mold over and over again?

Thanks for stopping by and as always have a great day and God Bless! 

PaperClay "Refrigerator Magnet"

Good morning all-

Today I would like to welcome you to another Creative Paperclay project.  I have been having such a great time making things and experimenting with all different types of projects using paper clay.  Today I am showing you how to make a refrigerator magnet.

I rolled out my paper clay

 I cut a strip approximately 1 inche wide by about 12 inches long.  It really depends on how big you want your ribbon to be.

 I then formed the ribbon.  I had to cut a bit out of the inside so that it didn't bunch up when forming

 After the ribbon was formed I did add a bit of white glue to the strip to keep it in place.  I also textured the ribbon with an outside edge.

 After it dried I basecoated it in a white glossy acrylic paint.  Then after that dried I painted the ribbon pink.  Do you see the texture a bit better here?

 I attached a piece of magent to the back of the ribbon and now I can hang it on my refrigerator.

 Isn't it just cool?  I might add the word "Hope" to the ribbon with vinyl.  Let me know what you think.

You can purchase Creative Paperclay here or you can even get it at Hobby Lobby or Michaels.

I hope I've inspired you to use your paperclay or to try your hand at it.  It's fun and addicting for sure.

Festive Friday 6-10

Good morning and welcome to another edition of Festive Fridays. If you are new to us, sit back, grab a cup of coffee, relax and enjoy some wonderful Christmas Cards. Yes, I did say Christmas...Festive Fridays will be every other Friday with samples of Christmas cards. This way, you can be making your cards all year long and you will avoid the mad rush when you could be enjoying the Christmas Season. You should have just come from Debbie. If you stumbled upon this post you can go back to Terri and start at the beginning. There is also a complete list of the Festive Friday hop on the left sidebar under the Festive Fridays blinkie in case you get lost along the way.

As most of you know I also design for a company called Creative Paperclay...well I used something I made out of the paperclay.  I thought it would be fun to make some christmas tree ornaments.  All you need is some paperclay, cookie cutter and your imagination.  Hehehe.  After it dried, about 24 hours, I painted the tree and added some puffy white paint and then "blotted" it a bit to look kinda like snow.  I added a piece of gold embroidery floss for the hanger and there you have it. 
 
I just made a basic card using some real cute christmas tree paper and a little bit of ribbon.  I used a simple stamp and attached a little sentiment tag.  Then I attached the christmas tree ornament to the front of the card with removable tape.  Now you have a simple gift with a card.
 
I hope you like my Festive Friday card and hope to see you back in two weeks for another christmas card.  Now head on over to Angela and check out what she has for you.